I’ve tried to find Cricut craft projects that don’t require a big investment in more cartridges, though some do, of course. Several of them offer free template downloads or instructions on how to create the projects on your own. Also, some of these patterns are just as easily made on other paper cutting craft tools, such as the Gypsy and Cuttlebug.

Related Pages: Printable Box Templates, Printable Vintage Postcards, Printable Dragon Paper Craft

Cricut Paper Crafts

Cricut Paper Purse	Cricut Robot Papercraft	Pretty Cricut Cupcake Wrappers	Cricut Paper Flowers Craft

Halloween Cricut Crafts

Cricut Halloween Decorations	Cricut Paper Pumpkins	Decorated Halloween Candles	Halloween Door Hangers

Thanksgiving Cricut Crafts

Cricut Thanksgiving Turkey Craft	Cricut Thanksgiving Pie Favor Boxes	Cricut Thanksgiving Place Cards	Thanksgiving Paper Banners

Christmas Cricut Crafts

Paper Cutting Christmas Ornaments	Cricut Glitter Snowflakes	Christmas Mouse Candy Cane Holders	Cricut Paper Christmas Scene

Valentines Day Cricut Crafts

Cricut Valentine Treat Bag Toppers	Cricut Strawberry Valentine Treats	Cricut Valentine Cards	Cricut Valentines Day Banner

Easter Cricut Crafts

Cricut Spring Flower Easter Treats	Cricut Easter Bunny Basket	Cricut Easter Egg Holder	Cricut Easter Place Cards

Check out more paper cutting crafts while you are here, too!

What is so great about decoupage? Is it the fact that my kids can do it with practically no help from me? That decoupage is pretty hard to mess up? That decoupage projects always turn out awesomely? All of the above? Yes!

Decoupage Ideas for Halloween

Halloween Decoupage Projects

How to Decoupage

Really – this is brain dead easy. All you need is some Modpodge, paint brushes and paper or fabric. And technically you don’t even need Modpodge, as you can use watered down glue. I like love Modpodge because you can get it in a matte, glossy, or sparkle finish, there’s very little mess, and it lasts forever. They even have an outdoor strength version- WOO!

Step 1A – figure out what you are going to decoupage – it can be glass, plastic, wood, metal – practically anything. It can be jewelry, kids crafts, or even home decor. You can cut out pictures or fabric to adhere to your item or you can print out your own designs (though ink jet ink can smear – I have a laser printer that works perfectly for decoupage). You can also add pieces of ribbon, sequins, and pretty much anything that can be glued to a surface.

Step 1 – brush some Modpodge/decoupage medium onto your item

How to Decoupage - Step 1

Step 2 – place your paper or fabric onto the decoupage medium

How to Decoupage - Step 2

Step 3 – put a thin coat of more more Modpodge/decoupage medium on top of your paper or fabric

How to Decoupage - Step 3

Step 4 – Repeat until your project is covered!

Once it is dry, you can and should put at least one more coat of Modpodge over the project to seal it and protect it.

Making these Decoupage Halloween Candle Holders

I got all of the the glass candle holders at my local dollar store. Cheap, cheap, cheap!

For my Jack O’ Lantern mummy, I used strips of white tissue paper and cut out a pumpkin face out of black paper. This particular pumpkin face is from the Punkinhead font.

For the tall owl candle holder, I used this Fiskars Owl Squeeze Punch, cutting out the owls from scrapbook paper scraps.

For the orange pumpkin tall candle holder, I measured the circumference of the glass and created an orange rectangle in a drawing program. I then used this Halloween borders font to add the pumpkin and vines, then simply printed it out and decoupaged it onto the glass. I don’t recommend this if you only have an ink jet printer unless you test it first to make sure your ink won’t bleed all over the place. Then again, for a Halloween decoupage project, that might just look pretty cool.

More Halloween Kids Crafts

Easy Halloween Finger Puppets

Easy Halloween Handprint Crafts

Paper Bag Crafts for Halloween

I’ve always loved carving real pumpkins, but never really got adventurous with the designs, knowing that the thing would be mush in a week or so. I recently found some Funkins artificial pumpkins on sale, picked up a few, and suddenly I found myself carving pumpkins non-stop! If you aren’t familiar with Funkins, they are made with a solid type of foam that make them both carvable and realistic looking. They come in several shapes and sizes, and even color variations, including white pumpkins.

Artificial Pumpkin Carving

Funkins Carving Tips

I started out with one of my little pumpkins to get an idea of what it was like to work with the material. For the most part, it was just like carving a real pumpkin, which as we know can be a bit challenging sometimes. The foam is thick and requires as much pressure to cut it as a real pumpkin.

Mini Funkins Pumpkin Display

The tools I used at first was a very cheap wood carving set, which for this kind of job, worked just fine. They made perfect little squares and circles, and sliced through patterns pretty well. A little saw might have been better for longer cuts, but most of the stuff I was working on were small, short cuts. I experimented with carving out only the skin of the pumpkin, leaving the “flesh” intact. That turned out OK, but the foam looked pretty ragged.

But then my husband brought out the Dremel and it was like a hit of crack, I swear to you! I still needed the carving tools to make the small squares, but the Dremel was my new tool of choice.

That is, until I started making mistakes with the Dremel. Mistakes that were hard to fix and that started to tick me off.

Fixing Pumpkin Carving Mistakes & Troubleshooting

Getting Sharp Corners

Some of the mistakes I made with the Dremel might just have been because I didn’t have the right drill bit to use. But regardless, it’s pretty hard to get into tight angled corners with a round cutting bit. You get ‘sloppy’ corners that don’t look like they are supposed to:

Cutting corners with a Dremel

The way to get sharp corners is to go back in with a straight carving tool and carefully clip out the remnants that the Dremel left behind. Easy peasy.

Paint Fraying and Peeling

I noticed that sometimes the dremel breezed through the foam pumpkin, but left behind some frayed paint coating like this:

Frayed Edges on the Funkin from Dremel cutting

The way to get rid of it was to go back with a sanding bit and clear away the flakes of paint. DO NOT peel them off, because they will peel away from the part of the pumpkin you want to stay intact!

Ragged Cuts in the Artificial Pumpkin

Once that sanding bit came out, it was hard to stop. I was able to clean up a lot of my mistakes with it. Rememer the ragged cuts in the foam I got from the wood carving tools? Smooth as can be with the sanding tool. Plus it made it look much more realistic instead of bad exposed foam:

Jagged Cuts in the Artificial Pumpkin

After I cleaned up some of the edges, I ended up getting really anal retentive about making all of my edges smooth. So I took the Dremel bit and sanded over every single one of my previous cuts and edges. I would never go though this much trouble for a real pumpkin – but since I knew the artificial pumpkin would last, I wanted to make it as perfect as possible.

Fixing Cuts You Didn’t Want to Make

The most frustrating part was when I didn’t hold onto the Dremel hard enough and it went awry on me. That sucked. So instead of letting it ruin the pumpkin pattern, I incorporated the mistakes into my design.

I started making swirls on the sides of the pumpkin, with the intention of the ends looking clean like they did in this first shot. But then the Dremel made a big hole on the end of the swirl like in the second shot:

Pumpkin Cutting Mistakes

So I could have made all of the swirls wider, which would have been a huge pain. Instead I just went back and added random ‘dots’ to the swirls, to make it look like they were there on purpose. I liked that look better in the end, anyway!

Turning Carving Mistakes into Design Elements

But the one thing I couldn’t fix this way was that one of my more fragile carvings broke right off.

Attaching Broken Pumpkin Pieces

My attachment point was t-i-n-y, so I had to use something very thin to attach the pieces together. A toothpick would work if I had a little more width to work with. But I didn’t, so instead I used two small segments of floral wire. I stuck them into both ends, and gently pushed them together. I found out the hard way that Funkins are stronger than skin, and in my first attempt the wire shot right into the end of my thumb. OUCH. So please be careful with this step!

Some of the paint chipped when the part broke off, so I touched up the seam with a little bit of off white paint. I’ve zoomed in very closely in this photo, but you can’t really see the fix if you’re standing and just looking at the pumpkin.

Pumpkin Carving Patterns

I have a lot of posts of pumpkin stencils I’ve drawn myself or hacked out of clip art:

Disney Pumpkin Stencils

Scary Pumpkin Stencils

Cute Pumpkin Stencils

Spongebob Pumpkin Stencils

Ni Hao Kai Lan Pumpkin Stencils

Buy Funkins and Pumpkin Carving Tools at Amazon

12 Inch Orange Funkin	10 Inch Orange Funkin	8-pc. Mini Wood Carving Chisel Set	Dremel Variable Speed Rotary Tool with 55 Accessories

Beautiful Painted Pumpkins	Fall Leaf Decorated Pumpkins	Elegant Pumpkin Decorating Ideas	Wire Spider Pumpkin
Teddy Bear Pumpkin	Mr. Potato Head Pumpkin	Cute Puppy Pumpkins	Painted Pumpkins
Star Wars Death Star Pumpkin	Geeky Pumpkins!	Painted Pumpkin Patterns	Painted Witch Pumpkin
Martha Stewart Pumpkins	White Mantle Pumpkins	Pumpkin Halloween Decorations	Vintage Photo Pumpkins

Also check out these easy Halloween handprint crafts, Halloween party food recipes, Halloween scavenger hunts, and our awesome Halloween pumpkin stencils!